Page 1 of 1
Old petrol mower
Posted: Mon Sep 10, 2007 5:13 pm
by Elderflower
I`d be grateful for any advice about my very old petrol mower - so old that I don`t even know what make or model it is.
The cable thingy that goes from the handle down to the engine has broken. Does this mean the end?
I use it to cut the grass under the fruit trees at the allotment.
Posted: Mon Sep 10, 2007 9:41 pm
by Clive.
Hello,
If you are refering to the throttle control cable then any good local garden machinery agents should hopefully be able to help...most will stock a range of throttle cables to suit various makes and possibly some more universal types that can adjusted for length to suit older machines that are no longer supported for spares by the original manufacturer...I'm generally thinking here of a rotary type mower. The length of travel of the cable on older rotary type machines was fairly universal..it was just the overal length of the cable that varied.
If you mean the OPC control "dead mans handle" cable...then they appeared after my time working in the mower world so I would not myself refer to them as an old mower

and I don't know how universal their fittings may be.
Can you post a photo of your mower.??..I might then be able to have stab at a make/model...which may or may not help.

..but would satisfy my curiosity and might send me on a reminiscing trip
All the best,
Clive.
Posted: Tue Sep 11, 2007 11:12 pm
by richard p
the cable is really only a fancy piece of string, which enables a hand control to pull a lever elsewhere on the machine, you could possibly bodge a temporary repair with a piece of string or wire.
