Kitchen Garden Forum

Posted: **Thu Nov 24, 2005 9:38 pm**

To the fellow who's son was buying a Howard 200 rotavator! I have copied the handbook and will send to you as soon as I have your details
Jerry

Posted: **Sat Nov 26, 2005 11:21 am**

Jerry - Thanks for your reply. Details are David Tedd, 5 Lodge Court, Bognor Regis, PO21 4XP. Please let me know any expense you have incurred so I can refund it. Many Thanks Dave

Posted: **Thu Dec 01, 2005 8:44 pm**

Hi Dave Glad to have got hold of you at last. Don't worry copied it at work! will be in the post to you on Friday
Best wishes
Jerry

Posted: **Sun Dec 11, 2005 6:47 pm**

Hi Jerry. Received manual OK many thanks. Hope to collect the machine next week. Will keep you posted on progress or otherwise! Dave Tedd

Posted: **Thu Dec 15, 2005 9:30 am**

Hi Jerry. I have the machine now but there is no spark at the plug and I suspect the points but am not sure how to get at them. There is a nut in the centre of the starter pulley but I am loathe to use much force to undo it without knowing the construction. Do you know where I can get an engine manual or how it should come apart? Many thanks Dave Tedd

Posted: **Sat Dec 17, 2005 11:34 am**

Hi Jerry. I have now got the engine running sweetly and the points were dirty but had the correct gap. When you replied to the old forum you gave the name of a drive belt suppier and I wonder if you could repeat it as I am unable to access and search the old forum.I received all the engine details from the Allotments4all forum. Regards

Dave Tedd

Posted: **Tue Dec 20, 2005 9:13 am**

Hi Jerry. Cancel my last request as I have found a suitable drivebelt at Halfords pt no HB650a at £3-19. Also I have been sent details of the Villiers engine handbook at www.winget.co.uk. regards Dave Tedd

Posted: **Fri Dec 23, 2005 4:10 pm**

Hi Dave
Sorry not to have replied to your earlier questions, glad you've got your rotavator running and Happy Xmas

Posted: **Fri Dec 23, 2005 4:14 pm**

Hi Dave one other thing you can always get some useful info on Villiers engines from http://www.lortim.demon.co.uk/links.htm and http://www.oldlawnmowerclub.co.uk/restore/resthome.htm
Good luck
Jerry

Posted: **Fri Dec 23, 2005 4:27 pm**

Hi Dave
Have had some username problems so have a new one as above. One other useful address is http://www.mdr.co.uk/tillerparts/tillerparts.html

Posted: **Fri Dec 23, 2005 8:12 pm**

Hello,

For Villiers stationary engine spares;...

Kohler, Mag and Hatz, etc too...

Meetens Industrial Engines Ltd,
Unit 2 Eclipse Trading Estate
30 West Hill
Epsom
Surrey
KT19 8JD

0845 634 0295

I haven't dealt with them for 3 or 4 years now....but have always found them to be very knowledgeable and accurate with their info' and offering a prompt spares supply service for the older engines.

All the best,
Clive.

Kitchen Garden Forum

Howard 200 rotovator

Howard 200 rotovator

Howard Rotavator

Howard Rotavator

Villiers Mk 12/2 manual

Success!

Howard 200

Meetens for Villiers Spares