- rps20200509_190633-2.jpg (282.59 KiB) Viewed 28554 times
- rps20200509_190715-2.jpg (384.03 KiB) Viewed 28554 times
- 20200509_132638.jpg (3.26 MiB) Viewed 28554 times
Moderators: KG Steve, Chantal, Tigger, peter
clearway wrote:Hello all,
Sorry to jump into this thread, but this is a similar question. I've been working on a Wolseley Clearway this year. It was left in a shed at my fathers house for about 20 years. It has a 10hp Briggs and Stratton engine. I've built/fitted a new deck, replaced the coil/points/condensor/air filter/twin drive belts/stop switch/spindle bearings, etc. We had it running today and cutting grass, so nearly sorted out. There is still a problem with the twin belts, one of them came off when cutting (very long grass!). I think there should be a plate underneath the belts, the whole length between drive and driven pulleys, but the one on this machine is broken.
There is also a problem with grass getting wrapped around the right side wheel, I think a guard/shield is missing that side.
I see Clive has kindly provided a manual on these machines. I would be very gratefull for some pictures or a manual that shows the details I'm having problems with. Thanks.