old polycarbonate sheets from conservatory roofs.

Polytunnels, cold frames, greenhouses, propagators & more. How to get the best out of yours...

Moderators: KG Steve, Chantal, Tigger, peter

KMARKSnr
KG Regular
Posts: 46
Joined: Fri Dec 02, 2005 7:50 am
Location: Lancashire

Hi all,
I managed to get enough of these sheets to build a very large home made greenhouse/polytunnel hybrid :roll:
Before i attempt to build - is there anyone of us that has tried this,and found anything "for",or "against"this material being used?

Regards,
Mark.
I`m not "young enough"to know everything!
User avatar
peter
KG Regular
Posts: 5842
Joined: Fri Nov 25, 2005 1:54 pm
Location: Near Stansted airport
Has thanked: 18 times
Been thanked: 33 times
Contact:

A freind uses this alot and says the most important thing is to use the correct stuff to seal the open ends, from memory it is waterproof at the higher end and insectproof meash at the lower, but I could be wrong. :roll:
Do not put off thanking people when they have helped you, as they may not be there to thank later.

I support http://www.hearingdogs.org.uk/
darrenc
KG Regular
Posts: 76
Joined: Tue May 16, 2006 5:13 pm

Dear Mark,as a Polycarbonate Extrusion line operator(how jammy is that,i actually make the stuff)i can confirm that Peters reply regarding the position of the tapes is correct but you must also ensure the the side uppermost is the surface which is coated with the UV inhibitor otherwise it will deteriorate.
Try to keep any fixings at least 40mm from its edge.
Post Reply Previous topicNext topic