AVAILABILITY OF 20W/50 MOTOR OIL

Cleaning, fixing, using, repairing, best and worst of your mechanical aids in the garden...

Moderators: KG Steve, Chantal, Tigger, peter

User avatar
Cider Boys
KG Regular
Posts: 920
Joined: Sun Mar 05, 2006 6:03 pm
Location: Somerset
Has thanked: 9 times
Been thanked: 39 times

Does anyone know of a national supplier of a budget 20W/50 mineral motor oil? My Ferguson needs a transmision/hydraulics and engine oil change and my local supplies no longer stock a lower spec 20W/50.

Thanks for any information

Barney
Mole
KG Regular
Posts: 184
Joined: Tue Nov 14, 2006 9:01 pm
Location: East Devon

I believe Mole Valley Farmers sell it. (regional I know not National)

Mole
madasafish
KG Regular
Posts: 372
Joined: Mon Sep 04, 2006 7:51 pm
Location: Stoke On trent

Halfords: Classic Engine Motor oil...edit (or something similar )
Just wander round the oil shelf.. lots of it..
User avatar
Cider Boys
KG Regular
Posts: 920
Joined: Sun Mar 05, 2006 6:03 pm
Location: Somerset
Has thanked: 9 times
Been thanked: 39 times

Thanks for the information but I am after a budget 20w/50 oil, the Ferguson takes 5 gallons in the transmission/hydraulics, 1 ½ gallons in the engine and best part of a pint in the air filter so cost is a consideration.

Barney
madasafish
KG Regular
Posts: 372
Joined: Mon Sep 04, 2006 7:51 pm
Location: Stoke On trent

Try your local supermarket(Morrisons, Tesco, Asda do cheap oils). All sell budget 20-50 oils around £5 per 5litre cans...

Or your local Motor Factor (Yellow Pages) should have one...

Or Aldi/Lidl should be cheaper than anyone:-)
gandalf
KG Regular
Posts: 21
Joined: Fri Jan 26, 2007 11:39 pm
Location: nottinghamshire

You need hydraulic oil for the hydraulics, not engine oil. It is going to cost you £40..there is no escape...
User avatar
richard p
KG Regular
Posts: 1573
Joined: Mon Nov 21, 2005 1:22 pm
Location: Somerset UK

fraid not gandalf , on these old tractors the hydraulics use the gearbox and back axle oil. hydraulic oil is only good for dedicated hydraulic systems, like power steering and motor circuits. it is far too thin for gearboxes, our local mechanic even recommends ep 90 gear oil for tractor backends , its thicker than the "normal" universal oils and so gives better performance with worn hydraulic pumps
User avatar
Cider Boys
KG Regular
Posts: 920
Joined: Sun Mar 05, 2006 6:03 pm
Location: Somerset
Has thanked: 9 times
Been thanked: 39 times

You are quite right Richard; in fact if you were to use hydraulic oil the hydraulics would not work correctly. Originally Ferguson and other tractors specified a straight SAE 30 or 40, depending on ambient temperatures. These oils now are very expensive and not as advanced as modern oils so the accepted compromise is to use a multigrade 20W/50 mineral oil in the transmission/hydraulics. Naturally you do not need a high specification 20w/50 with all the additives for a modern engine, just basic oil will suffice. In fact the same basic multigrade later type oil is far superior to the old monogrades of the 1940s and 50s and can also used in the engine.

Fortunately I have found a source of cheap oil at a local supermarket.

Barney
User avatar
peter
KG Regular
Posts: 5845
Joined: Fri Nov 25, 2005 1:54 pm
Location: Near Stansted airport
Has thanked: 18 times
Been thanked: 36 times
Contact:

My local mower repair shop does SAE30 in gallon thingies. :?
Do not put off thanking people when they have helped you, as they may not be there to thank later.

I support http://www.hearingdogs.org.uk/
Kev
KG Regular
Posts: 26
Joined: Sat Sep 16, 2006 7:57 pm
Location: Aberdeenshire

Try millers oils http://www.millersoils.net/index2.html
They will sell you 5gal drums of straight 30 or whatever you want.
Kev
Post Reply Previous topicNext topic