can anyone advise as to where I might obtain a drive belt(MT329) for a Wolsley Merry Tiller? Do hope someone can help. thanks.
Ron Collins
wolsley merry tiller
Moderators: KG Steve, Chantal, Tigger, peter
- peter
- KG Regular
- Posts: 5842
- Joined: Fri Nov 25, 2005 1:54 pm
- Location: Near Stansted airport
- Has thanked: 18 times
- Been thanked: 33 times
- Contact:
Try Richard's website at http://www.merrytiller.co.uk/
Do not put off thanking people when they have helped you, as they may not be there to thank later.
I support http://www.hearingdogs.org.uk/
I support http://www.hearingdogs.org.uk/
Hello Ron
There are often quite a few MT bits and pieces (and machines) offered on ebay.
John
There are often quite a few MT bits and pieces (and machines) offered on ebay.
John
The Gods do not subtract from the allotted span of men’s lives, the hours spent fishing Assyrian tablet
What we observe is not nature itself, but nature exposed to our method of questioning Werner Heisenberg
I am a man and the world is my urinal
What we observe is not nature itself, but nature exposed to our method of questioning Werner Heisenberg
I am a man and the world is my urinal
- peter
- KG Regular
- Posts: 5842
- Joined: Fri Nov 25, 2005 1:54 pm
- Location: Near Stansted airport
- Has thanked: 18 times
- Been thanked: 33 times
- Contact:
Also try Ernest Doe in Malden Essex, or any good mower workshop.
Do not put off thanking people when they have helped you, as they may not be there to thank later.
I support http://www.hearingdogs.org.uk/
I support http://www.hearingdogs.org.uk/
Ron, if you have the old belt any good drive belt stockist (very often also stockist of bearings etc, such as Express Bearings), should be able to measure it and supply the correct one. Only two dimensions to worry about th elength and cross section. Best of luck.