Or NGK B2LM equivalent.

Have you changed the belt during the service?

Parts list:

http://www.oldlawnmowerclub.co.uk/forum ... tification

I have the same carb on an Atco Balmoral 14s. Its a Tillotson TCT. I'm looking for a diagram and parts list if anyone can point me in the direction please. I have tries the Tillotson web page but no luck

Hi , thank you for your responses. The puller tool is going to be made a bit better for future use. It also doubles up as a blade boss puller by putting the rods in the other holes. You can't see it from the pic but the top of the threaded rods are bent over to get behind the blade boss. I'll keep y...

Few more pics:

Hi everyone, thank you for all your input. Now, here are the pictures of the saga and how it turned out: The flywheel was not threaded so I had to tap the two holes. For reference, the size used was 0 (zero) BA thread. I made the flywheel puller, removed the flywheel and it revealed two halves, neat...

Hi to both of you, thank you very much for a speedy response. I can see the situation now. I thought the keyway was a steel one but it turns out is is an alloy (net research). I will make the removal tool and order a new keyway. I'll put the pictures on here for everyone to see and for future refere...

ok everyone, here is the long awaited update, The keyway is intact, Elite-47PDE-flywheel.jpg but looks out of line with the cut out in the shaft. I would have thought if the keyway moved it would have broken whereas this looks like it has slipped if that's possible? this crank from the correct parts...

Hi John,

Thank you for your valued input, greatly appreciated. I will check that as a matter of course. All findings will be posted back on here. Hopefully they will help others.

Yes, thank you for that. I removed the battery to see if that made a difference but it didn't. All the loom is in great condition. There is no condenser either as the coil works with the magnets spinning past on the flywheel. I wil try changing the coil to see if the spark is better but with a coil ...

Well, looking on a few forums it seems to be that the coil is suspect. I'll try that and report back. If anyone else has any input please feel free.

Thanks so far.

Hi Sally,

thank you for your input. Good point, I'll check and report back. Would there be a sensor / switch to activate this perhaps?

Briggs ES45 just will not start!! advice please. Hi everyone, I have a McCulloch Elite 47 PDE lawnmower with an electric start Briggs and Stratton (looks like a quantum engine) ES45. Here is the problem: . Throttle lever in correct position to start . Push primer bulb 3 times as usual .Turn the key ...

Yes, 2 non runners
Thanks as ever Clive. I'll report back when I've had a look (Could be a while with the cold weather).